Fujifilm phát hành firmware cho X-T5, X-T4, X-T3, X-H2, X-H2S, X-S20, X-S10

Sau thông tin về sự kiện Fujifilm X Summit được chia sẻ hôm qua, hôm nay Fujifilm đã chính thức phát hành firmware cho các máy và ống kín XF16-55mmf2.8.

FUJIFILM X-T5 Ver.2.10 – download here

The firmware update Ver.2.03 from Ver.2.02 incorporates the following issues:

1. AF accuracy is improved with the following focus settings and shooting conditions.
   ・FOCUS MODE：AF-S / AF-C
   ・AF MODE：SINGLE POINT
   ・Lens used：Wide-angle lens
   ・Photography subject：High-frequency subjects such as animal hair, fine leaves, or low-contrast subjects.
2. The firmware bug is fixed that the viewfinder (EVF) preview display will become monochromatic and freeze in rare cases under the following conditions.
   ・FOCUS MODE：AF-C
   ・POWER MANAGEMENT＞PERFORMANCE：BOOST
   ・POWER MANAGEMENT＞EVF/LCD BOOST SETTING：EVF FRAME RATE PRIORITY (100P) or (200P EQUIV.)
   ・“FUNCTION (Fn) SETTING”：“SUBJECT DETECTION ON/OFF” is allocated.
3. The firmware bug is fixed that “WRITE ERROR” appears rarely when recording images taken in Memory card slot 2.

FUJIFILM X-T4 Ver.2.10 – download here

The firmware update Ver.2.10 from Ver.2.01 incorporates the following issues:

1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
   [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR：Ver.1.30 or later
   Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
2. Other minor bugs are fixed.

FUJIFILM X-T3 Ver.5.10 – download here

The firmware update Ver.5.01 from Ver.5.00 incorporates the following issues:

1. The firmware bug is fixed that the camera freezes under the following shooting conditions after updating to Ver.5.00.
   ・ DRIVE DIAL: ADV
   ・ IMAGE QUALITY: “FINE + RAW” or “NORMAL + RAW”
2. Oher minor bugs are fixed.

FUJIFILM X-H2 Ver.3.10- download here

The firmware update Ver.3.10 from Ver.3.03 incorporates the following issues:

Refer to “X-H2 New Features Guide” and “X-H2S Network and USB Setting” for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.

1. The “TIME CODE SYNC. SETTING” option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.
   This allows connection to the ATOMOS AirGlu accessory, “UltraSync BLUE” via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from “UltraSync BLUE”.
2. The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
   (1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
   (2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
   (3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.
   Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.
3. The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.
4. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
   [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR：Ver.1.30 or later
   Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
5. Other minor bugs are fixed.

FUJIFILM X-H2S Ver.5.10 – download here

The firmware update Ver.5.10 from Ver.5.03 incorporates the following issues:

Refer to “X-H2S New Features Guide” and “X-H2S Network and USB Setting” for operating instructions and explanations on the revised items described in the item No.1, No.2 and No.3 below.

1. The “TIME CODE SYNC. SETTING” option is added to “TIME CODE SETTING” in the movie mode to allow time code synchronization with external devices.
   This allows connection to the ATOMOS AirGlu accessory, “UltraSync BLUE” via Bluetooth. In addition, timecode synchronization with multiple cameras (up to 6 cameras) is possible by acquiring timecode from “UltraSync BLUE”.
2. The connection procedure and display function at remote recording are improved when using File Transmitter FT-XH as follows.
   (1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
   (2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
   (3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.
   Note:The firmware of the File Transmitter FT-XH must be upgraded to the latest version to enable those functions above. Be sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.
3. The smartphone icon and Bluetooth icon are now displayed on the camera’s display screen when the camera and smartphone are connected via Bluetooth.
4. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
   [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR：Ver.1.30 or later
   Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
5. Other minor bugs are fixed.

FUJIFILM X-S20 Ver.1.20 – download here

The firmware update Ver.1.20 from Ver.1.13 incorporates the following issues:

1. Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
   [Target interchangeable lens] ・XF16-55mmF2.8 R LM WR：Ver.1.30 or later
   Note:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
2. Other minor bugs are fixed.

FUJIFILM X-S10 Ver.3.10 – download here

The firmware update Ver.3.01 from Ver.3.00 incorporates the following issue:

1. The firmware bug has been fixed that 24-hour display cannot be selected for “DATE/TIME”, which was newly added with Ver. 3.00.

XF16-55mmF2.8 R LM WR Ver.1.30- download here

The firmware update Ver.1.30 from Ver.1.20 incorporates the following issue:

1. Exposure tracking during zoom operation is improved when using the following cameras.[Applicable cameras]X-H2S (Ver.5.10 or later), X-H2 (Ver.3.10 or later), X-T5 (Ver.2.10 or later), X-T4 (Ver.2.10 or later), X-T3 (Ver.5.10 or later), X-S20 (Ver.1.20 or later) and X-S10 (Ver.3.10 or later)
   Note:Make sure to update the camera’s firmware to the latest version before updating the firmware of the interchangeable lens to enable those functions above.

File transmitter FT-XH Ver.2.10 – download here

The firmware update Ver.2.10 from Ver.2.00 incorporates the following issue:

1. The connection procedure and display function at remote recording are improved when attaching to X-HS2 or X-H2 camera.(1)Connection setting gets easier to use the Remote Rec Function by reading the QR code displayed on the camera with the tablet’s camera app to obtain the MAC address and IP address of the camera automatically.
   (2)A “MULTI” button is added to the “Remote Rec Function” menu. Pressing this button splits the screen display into four sections, allowing you to watch Live Views of multiple cameras simultaneously and pressing the “SINGLE” button bring back to the single screen display.
   (3)A “Clean display mode” is added to the “Remote Rec Function” menu. When “Clean display mode” is selected, only the Live View is displayed.[Applicable cameras] ・X-H2S firmware update：Ver.5.10 or later
   ・X-H2 firmware update：Ver. 3.10 or laterNote:Make sure to update the camera’s firmware to the latest version before updating the firmware for the File Transmitter FT-XH.

Hướng dẫn cập nhật firmware cho các máy fujifilm